[Jan 28, 2022] New 700-905 Exam Dumps with High Passing Rate
Get 700-905 Braindumps & 700-905 Real Exam Questions
Cisco 700-905 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
NEW QUESTION 20
Refer to the exhibit.
Which VIC model supports two wire connectivity to each Fabric Interconnect?
- A. VIC 1457
- B. VIC 1227
- C. VIC 1557
- D. VIC 1387
Answer: B
NEW QUESTION 21
Which two Cisco UCS Servers support converged nodes in HyperFlex Data Platform (HXDP)? (Choose two.)
- A. UCS C480
- B. HX240
- C. UCSB200
- D. UCS B480
- E. HX 220
Answer: B,E
NEW QUESTION 22
Which two processes does failure on a node initiate? (Choose two.)
- A. Distributed pooled data is migrated off nodes to master data store.
- B. The VMs on the failed node are moved to another node by vSphere high availability
- C. A call-home process is initiated and the failure is reported to TAC
- D. The system is marked unhealthy but remains operational.
- E. Affected node is marked as unhealthy and placed into standby mode
Answer: B,D
NEW QUESTION 23
What does the letter W indicate when selecting CPUs for your HX Node (le. HX-CPU 8170M)?
- A. support for NVMe
- B. support of 1.5 TB/socket of memory
- C. support for 768 TB/socket of memory
- D. support for all flash drive array
Answer: B
Explanation:
NEW QUESTION 24
If a GPU card is Installed in HyperFlex nodes before a cluster is created, which action can be used to
automatically build the service profile in UCS Manager?
- A. Check the GPU workflow during the cluster creation process
- B. Check Run UCS Manager Configuration during the cluster creation process
- C. Check the extended memory option during the cluster creation process
- D. Check the administrative workflow option during the cluster creation process
Answer: A
NEW QUESTION 25
How many separate VLANs must each HyperFlex node be configured with running ESXi?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
Explanation:
NEW QUESTION 26
What is required to cluster a pair of Fabric Interconnects?
- A. connection between the Fl pair using ports L1 and L2
- B. HXDP 3.5.2 or better
- C. uplink connections to the enterprise network
- D. UCS Manager 2.1 or better
Answer: A
NEW QUESTION 27
What is the minimum amount of memory required for an HX node?
- A. 64 GB
- B. 128 GB
- C. 32 GB
- D. 192 GB
Answer: B
Explanation:
NEW QUESTION 28
How many separate VLANs must each HyperFlex node be configured with running ESXi?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 29
Which two processes does failure on a node initiate? (Choose two.)
- A. Distributed pooled data is migrated off nodes to master data store.
- B. The VMs on the failed node are moved to another node by vSphere high availability
- C. A call-home process is initiated and the failure is reported to TAC
- D. The system is marked unhealthy but remains operational.
- E. Affected node is marked as unhealthy and placed into standby mode
Answer: B,D
Explanation:
NEW QUESTION 30
A Controller Virtual Machine (CVM) is an Ubuntu Linux VM that lives outside the converged data platform
on the housekeeping drive since it is involved in creating the convergence data platform Which two features
tor CVMs are valid? (Choose two.)
- A. an Ubuntu based VM running in the control space of each individual server, having linear access to the
server's VMs and networking controls - B. is installed automatically by the HyperFlex installer, configured through the installer
- C. creates hooks tor services related to third-party abstraction applications
- D. needs network access to ESXi. other CVMs, and management network
- E. does not perform caching, deduplication: and compression of data
Answer: A,B
NEW QUESTION 31
Where is the VIC configuration for number type, identify, failover, settings, and bandwidth stored?
- A. in non-volatile memory on the VIC
- B. in VCenter virtual machine image
- C. in UCS Manager server profiles
- D. in UCS Manager service profiles
Answer: A
NEW QUESTION 32
Which uses for the system drive in an HX node are valid? (Choose two.)
- A. Virtual machine store
- B. Migration
- C. Saving and restoring program state
- D. Garbage collection
- E. Write Cache
Answer: C,D
NEW QUESTION 33
How many DIMMs are supported per memory channel in the Cisco UCS M5 server?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
Explanation:
NEW QUESTION 34
There are often disadvantages when using mixed hardware, and uniform systems are highly advised. What are
three disadvantages of using validated yet mixed hardware? (Choose three.)
- A. Validated yet "mixed" hardware systems may be supported by the
specific original equipment manufacturers but software vendors require a master level services
agreement. - B. "Software only" solutions are inherently more secure, adhering to government regulations.
- C. "Software only" solutions can result in a lack of simplicity for installation and maintenance. While setup
and maintenance of an HCI solution might be simple you still need to configure and maintain the
hardware part, which is not orchestrated by the HCI solution. - D. "Software only" HCI solutions often mean that HCI vendors do not have control over the hardware that
the consumer is using. The lack of control over the hardware can result in hardware not being
security-compliant (usually the case with white box solutions) or not being optimally configured for the
given HCI solution. - E. Validated hardware does not mean smooth performance, which particularly applies to hardware that is
seldom chosen for the hardware part of the "software only" solution. - F. "Hardware only" solutions require less latency for data aggregation.
Answer: A,E,F
NEW QUESTION 35
What is required to cluster a pair of Fabric Interconnects?
- A. connection between the Fl pair using ports L1 and L2
- B. HXDP 3.5.2 or better
- C. uplink connections to the enterprise network
- D. UCS Manager 2.1 or better
Answer: A
Explanation:
NEW QUESTION 36
Which statement about Standalone Cisco UCS Server Deployments is valid?
- A. They do not require Cisco Fabric Interconnects to operate, which reduces the Capital Expenses (CapEx) associated with the deployment
- B. They require Cisco Fabric Interconnects to operate, which reduces the Operating Expenses (OpEx) associated with the deployment
- C. They require Cisco Fabric Interconnects to operate, which reduces the Capital Expenses (CapEx) associated with the deployment
- D. They do not require Cisco Fabric Interconnects to operate, which reduces the Operating Expenses (OpEx) associated with the deployment
Answer: A
Explanation:
NEW QUESTION 37
If a GPU card is Installed in HyperFlex nodes before a cluster is created, which action can be used to automatically build the service profile in UCS Manager?
- A. Check the GPU workflow during the cluster creation process
- B. Check Run UCS Manager Configuration during the cluster creation process
- C. Check the extended memory option during the cluster creation process
- D. Check the administrative workflow option during the cluster creation process
Answer: A
Explanation:
NEW QUESTION 38
......
700-905 Dumps To Pass Cisco Exam in 24 Hours - DumpsValid: https://testprep.dumpsvalid.com/700-905-brain-dumps.html