Sample Questions
Which protocol is the Cisco proprietary implementation of FHRP?
- HSRP
- VRRP
- CARP
- GLBP
Which two statements about late collisions are true? (Choose two.)
- They may indicate a duplex mismatch.
- By definition, they occur after the 512th bit of the frame has been transmitted.
- They are frames that exceed 1518 bytes.
- They indicate received frames that did not pass the FCS match.
- They occur when CRC errors and interference occur on the cable.
Which three characteristics are representative of a link-state routing protocol? (Choose three.)
- utilizes event-triggered updates
- provides common view of entire topology
- calculates shortest path
- utilizes frequent periodic updates
- exchanges routing tables with neighbors
What is the effect of the given configuration?
- It configures the native VLAN.
- It configures the default VLAN.
- It configures an active management interface.
- It configures an inactive switch virtual interface.
Which command can you enter to view the ports that are assigned to VLAN 20?
- Switch#show ip interface brief
- Switch#show ip interface vlan 20
- Switch#show vlan id 20
- Switch#show interface vlan 20
If primary and secondary root switches with priority 16384 both experience catastrophic losses, which tertiary switch can take over?
- a switch with priority 8192
- a switch with priority 20480
- a switch with priority 4096
- a switch with priority 12288
Which two statements about IPv6 and routing protocols are true? (Choose two.)
- Link-local addresses are used to form routing adjacencies.
- Loopback addresses are used to form routing adjacencies.
- EIGRPv3 was developed to support IPv6 routing.
- OSPFv3 was developed to support IPv6 routing.
- EIGRP, OSPF, and BGP are the only routing protocols that support IPv6.
Which command can you enter to configure a local username with an encrypted password and EXEC mode user privileges?
- Router(config)#username jdone privilege 1 password 7 PASSWORD1
- Router(config)#username jdone privilege 1 password 7 08314D5D1A48
- Router(config)#username jdone privilege 15 password 0 08314D5D1A48
- Router(config)#username jdone privilege 15 password 0 PASSWORD1
Which three commands can you use to set a router boot image? (Choose three.)
- Router(config)#boot bootldr bootflash:c4500-jk9s-mz.122-23f.bin
- Router(config)# boot system tftp c7300-js-mz.122-33.SB8a.bin
- Router> boot flash:c180x-adventerprisek9-mz-124-6T.bin
- Router(config)#boot system rom c7301-advipservicesk9-mz.124-24.T4.bin
- Router(config)# boot system flash c4500-p-mz.121-20.bin
- Router(config)#boot flash:c180x-adventerprisek9-mz-124-6T.bin
Which three statements about static routing are true? (Choose three.)
- Routers can use update messages to reroute when links fail.
- It is best used for large-scale deployments.
- It is best used for small-scale deployments.
- It uses consistent route determination.
- It requires more resources than other routing methods.
- Routing is disrupted when links fail.
What will be the result if the following configuration commands are implemented on a Cisco switch?
Switch(config-if)# switchport port-security Switch(config-if)# switchport port-security mac-address sticky
- Statically configured MAC addresses are saved in the running-configuration file if frames from that address are received.
- A dynamically learned MAC address is saved in the startup-configuration file.
- A dynamically learned MAC address is saved in the VLAN database.
- A dynamically learned MAC address is saved in the running-configuration file.
- Statically configured MAC addresses are saved in the startup-configuration file if frames from that address are received.
Which statement is correct regarding the operation of DHCP?
- If an address conflict is detected, the address is removed from the pool for an amount of time configurable by the administrator.
- If an address conflict is detected, the address is removed from the pool and an administrator must resolve the conflict.
- If an address conflict is detected, the address is removed from the pool and will not be reused until the server is rebooted.
- A DHCP server uses a gratuitous ARP to detect DHCP clients.
- A DHCP client uses a ping to detect address conflicts.
- A DHCP client uses a gratuitous ARP to detect a DHCP server.
Fast delivery after payment
A person's life will encounter a lot of opportunity, but opportunity only favors the prepared mind (300-535 exam training questions), there is no denying fact that time is a crucial part in the course of preparing for exam. Our company has taken this into account at the very beginning, so that we have carried out the operation system to automatically send our Cisco 300-535 latest training material to the email address that registered by our customers, which only takes 5 to 10 minutes in the whole process. That is to say, you can download 300-535 exam study material and start to prepare for the exam only a few minutes after payment.
After purchase, Instant Download 300-535 Dumps: Upon successful payment, Our systems will automatically send the product you have purchased to your mailbox by email. (If not received within 12 hours, please contact us. Note: don't forget to check your spam.)
It is an admitted fact that certification is of great significance for workers to get better jobs as well as higher income, nevertheless, the exam serves as an obstacle without valid 300-535 latest training material, in the way for workers to get the essential certification. Now, our company is here to provide a remedy--300-535 exam study material for you. Our company has gathered a large number of first-class experts who come from many different countries to work on compiling the 300-535 exam topics pdf for the complicated exam. It goes without saying that such an achievement created by so many geniuses can make a hit in the international market. Here I would like to show more detailed information about our Cisco 300-535 exam study material for you.
Understanding functional and technical aspects of Automation APIs and Protocols Cisco Service Provider Solutions (300-535 SPAUTO)
The following will be asked from you in the CISCO 300-535 exam dumps:
- Describe and configure network traffic automation with Cisco XTC
- Implement configuration and operation management using NETCONF protocol
- Describe common HTTP authentication mechanisms (basic, token, and oauth)
- Describe and configure model-driven telemetry on Cisco devices
- Describe how to automate virtualized resources with Cisco ESC
- Describe the characteristics and use of YANG Data Models (OpenConfig, IETF, and Vendor)
- Describe how to automate service provider WAN with Cisco WAE
- Identify the XML instance based on a YANG model
- Use NETCONF and RESTCONF programmability protocols on Cisco devices
- Implement configuration and operation management using RESTCONF protocol
- Automate service provider network configuration with Cisco NSO
- Interpret a YANG module tree generated by pyang
- Identify the JSON instance based on a YANG model
- Describe and use network automation tools that utilize SSH
- Compare the NETCONF datastores
- Compare common data types (JSON, XML, YAML, plain text, gRPC, and protobuf)
- Describe and use tools to validate YANG data models on Cisco devices
Free demo before buying
Just like the old saying goes "something attempted, something done." Our 300-535 exam study material has been well received by all of our customers in many different countries, which is definitely worth trying. The contents in our 300-535 exam study material is the key points for the exam test, and the contents in the free demo is a part of our Cisco 300-535 exam training questions, as is known to all, the essence lies in things condensed and reduced in size, therefore, you are provided the a chance to feel the essence of our 300-535 valid exam guide. What's more, the question types are also the latest in the study material, so that with the help of our 300-535 exam training questions, there is no doubt that you will pass the exam as well as get the certification without a hitch.
Build commitment through choice
Being for the purpose of catering to the various demands of our customers about 300-535 exam study material, we provide three kinds of versions for our customers to choose namely, PDF version, PC test engine and APP test engine. Needless to say, the PDF version is convenient for you to read as well as printing, therefore you can concentrate on the Cisco 300-535 valid updated questions almost anywhere at any time. The shining point of the PC test engine is that you can take part in the mock examination in the internet as long as your computer is equipped with Windows operation system. As for APP test engine, the greatest strength is that you can download it almost to any electronic equipment, what's more, you can read our 300-535 practice exam material even in offline mode so long as you open it in online mode at the very first time.
Cisco 300-535 Exam Syllabus Topics:
| Section | Weight | Objectives |
|---|---|---|
| Network Programmability Foundation | 10% | - Synchronous vs asynchronous API consumption - Python basics: data types, functions, classes, conditions, loops - Python virtual environments - Version control with Git - API styles: REST, RPC |
| Automation APIs and Protocols | 30% | - gRPC and gNMI protocols - NETCONF protocol and datastores - RESTCONF protocol - Model-driven telemetry - YANG data modeling language |
| Network Device Programmability | 30% | - Configuration management with Ansible - Validation of operational state - Python scripts with YDK - Configuration management with Netmiko |
| Automation and Orchestration Platforms | 30% | - Cisco Network Services Orchestrator (NSO) - Service package deployment - Cisco Elastic Services Controller (ESC) - Cisco WAN Automation Engine (WAE) |
PDF Version Demo



